2017 Lexus RC 300
Mileage
102,915
Service Date
9/17/2021
Services Performed
- LOF TRANS FLUSH DIFF SERVICES TRANSFER CASE SERVICE RADIATOR FLUSH CHANGE ALL FILTERS CHECK BRAKES – NOISE SPARK PLUGS ANYTHING ELSE DUE AT 100,000 – CHECK OVER
- Access cabin filter housing. Remove the old air filter. Clean out housing of debris. Install new filter. Reassemble all other related components.
- Inspect vehicle exterior lighting. Check under hood fluids and top off with manufacturer specified fluid(s). Check engine air filter and serpentine belt(s). Drain vehicle engine oil. Check tire pressure and fill to manufacturer's specifications. Perform visual inspection of the vehicle suspension and underbody. Check vehicle drivetrain fluids when needed. Fill engine with 6.8 quarts of Amsoil full-synthetic engine oil. Recheck engine oil level.
- Disassemble any engine shields and engine control components to access the ignition system. Remove the ignition coils to access the spark plugs. Remove and replace the engine spark plugs. Reassemble all related components. Recheck for proper ignition operation.
- Disassemble the rear brake calipers and mounting brackets. Remove the rear brake rotors and clean the rotor mounting surfaces. Clean the caliper slides and lubricate. Reassemble the rear brakes with new brake pads and brake rotors. Test drive for proper braking operation.
- Remove the front brake rotors and clean the rotor mounting surfaces. Clean the caliper slides and lubricate. Reassemble the front brakes with new brake pads and brake rotors. Test drive for proper braking operation.
- Remove the needed shields and covers to gain access as needed to the rear differential cover bolts and cover. Clean the gasket sealing surfaces and cover. Clean out the rear differential and reassemble with new heavy duty sealer and/or gasket. Fill with manufacturers specified fluid.
- Remove the needed shields and covers to gain access as needed to the front differential cover bolts and cover. Clean the gasket sealing surfaces and cover. Clean out the front differential and reassemble with new heavy duty sealer and/or gasket. Fill with manufacturers specified fluids.
- Add cooling system flush/cleaner to the cooling system and run vehicle. Flush out old coolant and replace with manufacturer specified coolant amount. Add cooling system conditioner. Test Drive for proper operation.
- Road test and verify engine performance, transmission operation, and shift patterns. Flush all old fluid out and replace with new fluid as per vehicle specs.
- Rotate tires, check & set air pressure, check wear pattern.
JILL & JAMIE B. gave our service a 5 star review on 9/20/2021
