Ford Archives - Page 3 of 5 - River Crest Tire And Auto Service

2011 Ford Escape
Mileage
165,667
Service Date
3/2/2022
Services Performed
NEED ALL INFO!!! GEAR SHIFT IS HARD TO GET OUT OF PARK UNLESS YOU SLAM ON BRAKES AND BRAKE LIGHTS DON'T WORK
disassemble any shields or ducts required to access the stop light switch. Remove and replace the stoplight switch. Reassemble all related components. Recheck for proper stop light switch operation.
THOMAS B. gave our service a 5 star review on 3/15/2022
2015 Ford Taurus
Mileage
58,910
Service Date
3/3/2022
Services Performed
NEED ALL INFO!!! MTB4 245/45R20 CONT EXTREME CONTACT DWS06+XL
Remove wheels from vehicle. Inspect vehicle brakes. Remove and install a new tires on to the wheels. Balance the tires. Install the wheels onto the vehicle and torque lug nuts to manufacturer's specifications. Perform TPMS relearn when needed.
MARK P. gave our service a 5 star review on 3/9/2022
2017 Ford F-150
Mileage
61,329
Service Date
2/24/2022
Services Performed
NEED ALL INFO!!! LOF ROTATE CHECK BELT NOISE – POSSIBLE WATER PUMP?
Inspect vehicle exterior lighting. Check under hood fluids and top off with manufacturer specified fluid(s). Check engine air filter and serpentine belt(s). Drain vehicle engine oil. Check tire pressure and fill to manufacturer's specifications. Perform visual inspection of the vehicle suspension and underbody. Check vehicle drivetrain fluids when needed. Fill engine with 7.7 quarts of semi-synthetic engine oil. Recheck engine oil level.
Rotate tires, check & set air pressure, check wear pattern.
remove the serpentine belt to access the belt tensioner. Remove and Replace the serpentine belt tensioner. Install the Serpentine belt.
ERON G. gave our service a 5 star review on 2/28/2022
2016 Ford Escape
Mileage
50,993
Service Date
2/9/2022
Services Performed
ROTATE
Rotate tires, check & set air pressure, check wear pattern.
SCOTT & LISA B. gave our service a 5 star review on 2/15/2022
2012 Ford Escape
Mileage
118,858
Service Date
2/8/2022
Services Performed
LOF
Inspect vehicle exterior lighting. Check under hood fluids and top off with manufacturer specified fluid(s). Check engine air filter and serpentine belt(s). Drain vehicle engine oil. Check tire pressure and fill to manufacturer's specifications. Perform visual inspection of the vehicle suspension and underbody. Check vehicle drivetrain fluids when needed. Fill engine with 5.3 quarts of Amsoil full-synthetic engine oil. Recheck engine oil level.
KAREN P. gave our service a 5 star review on 2/8/2022
2013 Ford F-150
Mileage
152,602
Service Date
11/18/2021
Services Performed
ALIGNMENT – TIRE WEAR – CUSTOMER JUST INSTALLED STRUTS
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
BERNIE E. gave our service a 5 star review on 11/19/2021
2007 Ford Focus
Mileage
187,183
Service Date
8/23/2021
Services Performed
LOF ROTATE
Inspect vehicle exterior lighting. Check under hood fluids and top off with manufacturer specified fluid(s). Check engine air filter and serpentine belt(s). Drain vehicle engine oil. Check tire pressure and fill to manufacturer's specifications. Perform visual inspection of the vehicle suspension and underbody. Check vehicle drivetrain fluids when needed. Fill engine with 4.5 quarts of Quaker State semi-synthetic engine oil. Recheck engine oil level.
Rotate tires, check & set air pressure, check wear pattern.
URSULA & JOE M. gave our service a 5 star review on 8/26/2021
2010 Ford Escape
Mileage
116,806
Service Date
8/25/2021
Services Performed
Found melted wires at compressor connector. Bypass connector and hardwire. Test for proper operation
JAMES BARB W. gave our service a 5 star review on 8/26/2021
2005 Ford Escape
Mileage
118,369
Service Date
8/19/2021
Services Performed
CHECK ENGINE LIGHT IS ON. EXHAUST SMELL OUTSIDE OF THE VEHICLE. LEAKS OIL ABS LIGHT IS ON
Scan and record codes located in vehicle systems. Perform diagnostic tests to determine cause of vehicle service light(s). P0430 BANK 2 CATALYST
Inspect vehicle exterior lighting. Check under hood fluids and top off with manufacturer specified fluid(s). Check engine air filter and serpentine belt(s). Drain vehicle engine oil. Check tire pressure and fill to manufacturer's specifications. Perform visual inspection of the vehicle suspension and underbody. Check vehicle drivetrain fluids when needed. Fill engine with 6.0 quarts of Quaker State semi-synthetic engine oil. Recheck engine oil level.
Remove and replace rear glass hinges. Test for proper operation
Remove and replace B2 converter, B2S1 oxygen sensor, and B2S2 oxygen sensor, along with related exhaust gasket(s). Recheck for proper operation
Remove and replace right front brake tone ring. Test for proper operation
Remove the front brake rotors and clean the rotor mounting surfaces. Clean the caliper slides and lubricate. Reassemble the front brakes with new brake pads and brake rotors. Test drive for proper braking operation.
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
Separate the lower control arm lower ball joint as need and unbolt the lower control arm assembly. Reassemble with new lower control arm as well as new bushings and lower ball joint assemblies if needed. Reassemble all other related components.
Remove and replace front and rear brake hose assembly. Bleed air out of the brake system. Test drive for proper operation.
Disassemble the subframe assembly and suspension required to access the transmission. Remove the transmission assembly. Remove and replace the rear main seal with housing. Reassemble all related components. Fill the transmission with manufacturers specified fluid. Test drive for proper operation.
Disassemble the vehicle exhaust system and subframe assembly when needed to access the engine oil pan assembly. Remove the engine oil pan assembly. Clean the gasket surfaces. install the oil pan assembly with new gasket(s). Reassemble all related components with new gaskets when needed. recheck for leak(s).
Remove the upper intake manifold assembly to access the lower intake. Remove the lower intake manifold. Clean all gasket surfaces and install the intake manifolds with new gaskets. Reassemble all related components. Fill with manufacturer specified fluids. Recheck for leak(s).
LAURIE S. gave our service a 5 star review on 8/24/2021
2014 Ford F-150
Mileage
66,649
Service Date
8/19/2021
Services Performed
MTB4 275/55R20 DESTINATION LE3
Remove wheels from vehicle. Inspect vehicle brakes. Remove and install a new tires on to the wheels. Balance the tires. Install the wheels onto the vehicle and torque lug nuts to manufacturer's specifications. Perform TPMS relearn when needed.
DOUG & MICHELLE G. gave our service a 5 star review on 8/22/2021

Ford

We Service and Repair all Ford cars